Supports payload.bin directly, Maximum up to 6 payload.
Built-in 3 payloads: ATMOSPHERE，REINX and SXOS, easy to switch by pressing button.
Easy Management-It will be immediately recognized as a USB flash drive when connect to PC.
Good compatibility, supports WINDOWS,MAC OS and LINUX system.
AceNS User Guide
1. Power on Nintendo Switch and insert AceNS Loader to Switch. Led will flash white after 10 seconds of charging.
2. Long press the button of AceNS Loader to switch the payloads. Different colors of LED mean different payloads. You can switch to different payloads.
ATMOSPHERE - Blue Light
REINX - Green Light
SX OS - Red Light
3. Download the kernel of SX OS, ATMOSPHERE and ReiNX and unzip to the root of microSD card. If you select to boot ATMOSPHERE or ReiNX, you need to copy nsp games to tinfoil/nsp folder in your microSD card.
ATMOSPHERE and ReiNX SDFilesV81:
4. Make sure that your Switch console is completely power off. Plug the micro SD card into your Switch console. Slide the Jig into the Right-Hand Joycon rail and ush it down, insert AceNS Loader to your Switch console. Holding the VOL+ button ,then press the Power Button. Select the payload.bin file and launch it. Then your Switch will boot into CFW
5. Select Album and you will go into the hbmenu. Launch the Tinfoll to install nsp games.
How to Switch to different payloads?
Power on Nintendo Switch and insert AceNS Loader to Switch. Led will flash white after 10 seconds of charging.
Long press the button of AceNS Loader to switch the payloads. Different colors of LED mean different payloads. You can switch to different payloads.
Advanced Users Guide
1. Supports up to 6 payload.bin, and sort folder by name with ascending order.The way of adding or replacing payload.bin:Connet AceNS Loader to your PC with micro USB cable and the AceNS Loader be recognized as a USB flash drive. Open the USB flash drive, you can copy and paste payload.bin to update it.
2. The cycle order of Led Light is: Blue, green, red, yellow, purple, blue The LED color is displayed cyclically based on the number of payload files in your microSD card.
3. While Led- indicates full charge
4. Press the button: LED flashed 2 times and shows the current payload. Long press the button: LED flashed 4 times and switch payload
5. Rule of updating the payload: The payload must be named payload.bin, stored in the folder under the root directory. And the folder name does not exceed 18 characters.
6. LAUNCH.TXT in your AceNS Loader saves the currently selected payload. The format is: /ATMOSPHERE_HEKATE/PAYLOAD.BIN